iscsi_target

차이

문서의 선택한 두 판 사이의 차이를 보여줍니다.

차이 보기로 링크

iscsi_target [2015/06/18 15:48] – 만듦 zzungiscsi_target [2015/06/18 15:49] (현재) – 바깥 편집 127.0.0.1
줄 1: 줄 1:
 +====== iSCSI Target_RHEL6 ======
  
 +테스트환경 \\
 +* HOST OS : CentOS 6.6 64bit \\
 +* GUEST OS : CentOS 6.6 64bit \\
 +===== tgt-setup-lun  =====
 +**tgt-setup-lun** : target 을 생성하고 target 을 장치에 추가해 주는 Script 명령어 입니다. \\
 +해당 명령어로 실행시 간단하게 iSCSI Target 을 생성 관리 할수 있습니다. \\
 +
 +=== Step.1 iSCSI Target 설치 ===
 +
 +
 +<code vim>
 +[root@iscsi ~]# yum install scsi-target-utils.x86_64 -y
 +</code>
 +<code vim>
 +[root@iscsi ~]# rpm -qa | grep scsi-target-utils
 +scsi-target-utils-1.0.24-16.el6.x86_64
 +</code>
 +=== Step.2 iSCSI Target 서비스 실행 ===
 +
 +<code vim>
 +[root@iscsi ~]# service tgtd start
 +[root@iscsi ~]# service tgtd status
 +[root@iscsi ~]# chkconfig tgtd on
 +</code>
 +=== Step.3 iSCSI Target 생성 ===
 +
 +* 디스크 생성 및 LVM 구성은 이곳에서 따로 보여주지 않는다. 
 +* tgt-setup-lun 스크립트 명령어로 아래와 같이 생성해 준다.
 +<code vim>
 +[root@iscsi ~]# tgt-setup-lun -d /dev/mapper/VG_DISK1-LV_Disk1 -n iSCSI_Target1
 +[root@iscsi ~]# tgt-setup-lun -d /dev/mapper/VG_DISK2-LV_Disk2 -n iSCSI_Target2
 +[root@iscsi ~]# tgt-setup-lun -d /dev/mapper/VG_DISK3-LV_Disk3 -n iSCSI_Target3
 +[root@iscsi ~]# tgt-setup-lun -d /dev/mapper/VG_DISK4-LV_Disk4 -n iSCSI_Target4
 +</code>
 +
 +* 생성된 파일을 targets.conf 파일에 입력하기
 +<code vim>
 +[root@iscsi ~]#tgt-admin --dump | grep -v default-driver > target.conf
 +[root@iscsi ~]#vim target.conf
 +<target iqn.2001-04.com.iscsi-iSCSI_Target3>  // iqn 이름을 현재 날짜 또는 원하는 이름으로 변경한다.
 + backing-store /dev/mapper/VG_DISK3-LV_Disk3
 +</target>
 +
 +<target iqn.2001-04.com.iscsi-iSCSI_Target1>
 + backing-store /dev/mapper/VG_DISK1-LV_Disk1
 +</target>
 +
 +<target iqn.2001-04.com.iscsi-iSCSI_Target4>
 + backing-store /dev/mapper/VG_DISK4-LV_Disk4
 +</target>
 +
 +<target iqn.2001-04.com.iscsi-iSCSI_Target2>
 + backing-store /dev/mapper/VG_DISK2-LV_Disk2
 +</target>
 +
 +[root@iscsi ~]#
 +
 +</code>
 +
 +* tgtd 데몬 재 시작
 +<code vim>
 +
 +[root@iscsi ~]# service tgtd restart
 +
 +</code>
 +
 +* Target 확인
 +<code vim>
 +
 +[root@iscsi ~]# tgt-admin -s
 +
 +</code>
 +
 +<code vim>
 +Target 1: iqn.2015-04.com.iscsi-iSCSI_Target1
 +    System information:
 +        Driver: iscsi
 +        State: ready
 +    I_T nexus information:
 +    LUN information:
 +        LUN: 0
 +            Type: controller
 +            SCSI ID: IET     00010000
 +            SCSI SN: beaf10
 +            Size: 0 MB, Block size: 1
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: null
 +            Backing store path: None
 +            Backing store flags: 
 +        LUN: 1
 +            Type: disk
 +            SCSI ID: IET     00010001
 +            SCSI SN: beaf11
 +            Size: 32216 MB, Block size: 512
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: rdwr
 +            Backing store path: /dev/mapper/VG_DISK1-LV_Disk1
 +            Backing store flags: 
 +    Account information:
 +    ACL information:
 +        ALL
 +Target 2: iqn.2015-04.com.iscsi-iSCSI_Target2
 +    System information:
 +        Driver: iscsi
 +        State: ready
 +    I_T nexus information:
 +    LUN information:
 +        LUN: 0
 +            Type: controller
 +            SCSI ID: IET     00020000
 +            SCSI SN: beaf20
 +            Size: 0 MB, Block size: 1
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: null
 +            Backing store path: None
 +            Backing store flags: 
 +        LUN: 1
 +            Type: disk
 +            SCSI ID: IET     00020001
 +            SCSI SN: beaf21
 +            Size: 10737 MB, Block size: 512
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: rdwr
 +            Backing store path: /dev/mapper/VG_DISK2-LV_Disk2
 +            Backing store flags: 
 +    Account information:
 +    ACL information:
 +        ALL
 +Target 3: iqn.2015-04.com.iscsi-iSCSI_Target3
 +    System information:
 +        Driver: iscsi
 +        State: ready
 +    I_T nexus information:
 +    LUN information:
 +        LUN: 0
 +            Type: controller
 +            SCSI ID: IET     00030000
 +            SCSI SN: beaf30
 +            Size: 0 MB, Block size: 1
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: null
 +            Backing store path: None
 +            Backing store flags: 
 +        LUN: 1
 +            Type: disk
 +            SCSI ID: IET     00030001
 +            SCSI SN: beaf31
 +            Size: 5377 MB, Block size: 512
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: rdwr
 +            Backing store path: /dev/mapper/VG_DISK3-LV_Disk3
 +            Backing store flags: 
 +    Account information:
 +    ACL information:
 +        ALL
 +Target 4: iqn.2015-04.com.iscsi-iSCSI_Target4
 +    System information:
 +        Driver: iscsi
 +        State: ready
 +    I_T nexus information:
 +    LUN information:
 +        LUN: 0
 +            Type: controller
 +            SCSI ID: IET     00040000
 +            SCSI SN: beaf40
 +            Size: 0 MB, Block size: 1
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: null
 +            Backing store path: None
 +            Backing store flags: 
 +        LUN: 1
 +            Type: disk
 +            SCSI ID: IET     00040001
 +            SCSI SN: beaf41
 +            Size: 5344 MB, Block size: 512
 +            Online: Yes
 +            Removable media: No
 +            Prevent removal: No
 +            Readonly: No
 +            Backing store type: rdwr
 +            Backing store path: /dev/mapper/VG_DISK4-LV_Disk4
 +            Backing store flags: 
 +    Account information:
 +    ACL information:
 +        ALL
 +
 +</code>
 +
 +* target 제거
 +<code vim>
 +
 +tgt-admin --delete ALL // 모든 타겟을 지운다.
 +tgt-admin --delete tid=4 // 타겟4번을 지운다.
 +tgt-admin --delete iqn.2015-04.com   // 해당 iqn.2015-04.com 타겟을 지운다.
 +
 +
 +</code>